3.0mm Coated Orange PVC Stainless Coil Hand Tool Safety Lanyards
inner wire dia: 1.0mm,1.2mm or other
outer coil dia: 6.0mm, 5.0mm, 4.0mm etc
stainless steel or galvanized steel or other
|5.length||stregthlength can be 120-180cm or as requirement|
|6.diameter of coil||30-50mm or as requirement|
8.end parts of fittings
stainless locking carabiners
or as required
7days if there were enough material in stock
Free sample available if all of dimensions same as our existing one
contact me ,to get a cost efficient solution.
1.The products are used to attached hand tools to user while they
The intent of the lanyard is to ensure that a tool will not drop
someone working or standing below the work zone .
such as window cleaning and working at heights
2.Tool Safety Lanyard for Scaffolding Scaffolders Tools and other
such as Tactic use
3.For small diameter coil tool lanayrd ,they can be used in the
boats ,etc or used in hiking to protect from losing goods or to
to your pocket ,it is very conventient .
2.long life cycle with plastic usually PU coating
3.smooth surface with plastic covering
4.when not at working ,it can be return to coil condition itself
5.Coil design reduces length, prevents snag and tangle, hazards.
6.Constructed with PU covered aircraft steel cable for ultimate
strength and durability
Tool lanyard selection :
1. Tool and lanyard selection needs to be carefully considered to
ensure operator safety and comfort.
2. In addition to our wide range of standard lanyards, we will
manufacture special lanyards for specific
3. Tools lanyards are fitted with lockable screwgate hooks at each
end. Hooks are permanently attached
to the lanyard material and so cannot be accidently detached.
4. Tools up to 5lbs (2.3kg) may be attached by lanyard to the
operator but a lower limit may be preferable
for operator comfort, safety and ease of operation.
For the qulity control , our test is supposed to pass 3 times using
your required weight load in the vertical drop ,the crimp cannot
pull-out ,and rope not broken after tested.
Our spiral lanyard was especial produced and have advanced
technology and We've been in this products for more than 8years ,and have many
regular customer in USA , prime quanlity!
how to choose material:1stain1.1.1.
1.stainless steel :
providing good corrosion resistance and strength comparable to
galvanized carbon steel grades.
Zinc coated carbon steel offers some corrosion resistance. It
remains ductile over long periods of working. Usually higher break
strengths than stainless steels.
Q:How do you control the quality?
A: 100% of the products will be tested and test its quality reliability ,
from raw material to half assembling until finishing products,
Each product should pass all these QC procedures before shipping to customer.
Q: What is your trading and payment terms?
1. Payment term: T/T 30% deposit after order confirmed, 70% balance before shipment or paypal
for small amount .
2. Lead time : normally 15-25days after deposit received.
3. Sample policy : Samples are always available for each model . Samples can be ready in 3-10 days
once payment received .
4. Shipping port: Shenzhen/Guangzhou China
5. Discounts : We offer discount for big quantity.
Q: How I can delivery the my goods?
1,By Express: such as DHL, UPS, TNT, FEDEX etc. The dispatch time is about 3-5 days
2,Sea Freight: we will update sea freight once we know your sea port where goods will be
3,Agent designated by client: please tell us the contact detail of your shipping agent and
we will arrange to deliver the items
1. How do you design spring lanyard?
Of course ,we have to know your application firstly and a number of
factors have to be considered, such as work load, safety abrasion,
environment ,cycle life, flexibility , cost, When we design the
steel spring lanyard.
2. what’s safety factor does your product use?
General ,use a 5 to 1 or 3 to 1 safety factor when we design it,
example :breaking load is (1000N) 100kg ,safety factor is 5:1
(200N) Breaking strength should never be considered the rope's
3. I would get a flexible cable assembly ,how do I choose?
In same diameter of steel wire cable ,the 7X19 construction is more
flexible than the 7X7 construction.
Example:1/16’’7X19 steel wire rope more flexible than 1/16’’7X7
4. Which material should I choose?
Stainless steel cable is more corrosion ,but it is expensive than
galvanized steel cable and has a slightly less tensile strength. If
it is use for general industry ,galvanized steel is ok, if it is
use for marine environment ,I recommend in stainless steel wire
cable . depend on you application.
5.What’s the lead time of my order?
It was largely depend on the size of your order .normally ,20days .
If you are in urgent need of it ,we will try my best to met your