Sheet Metal Cutting Fiber Laser Cutting Machine With Laser Power
The advantage of our 1500W fiber laser cutting machine ( double
1.1. The cutting quality is good:
Because of the small laser spot, high energy density, fast cutting
speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also
perpendicular to surface, dimensional accuracy of cutting pieces
can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness
is only a few dozen microns, laser cutting can be used as the final
working procedure, parts can be even used directly without
(3) Heat affected zone is very small, material performance is
hardly affected near the kerf width , and the workpiece deformation
is small. Also, kerf geometry is good , slitting rectangular
cross-section shapes appear to be regular.
1.2. Highly automation:
Adopts digital control, you only need to use CAD to draw the
picture and import to specialized software, laser cutting machine
can cut out the artifacts you need, moreover there is intelligent
typesetting function, thus can save raw material costs to the
1.3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine
has equipped with many sets of CNC work bench to realize numerical
control. You only need to change the CNC program to cut different
shape, as well as for two-dimensional cutting, and
1.4. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1500W laser to
cut 2mm low carbon steel plate, and can up to 120 m/min when
cutting 5mm polypropylene resin plate. Material does not need
clamping fixed for cutting, thus can save the jig and auxiliary
time for material upload and download.
1.5. Non-contact cutting:
There is no contact for work piece and laser head, so there is no
tool wear. No need to change "tool" for different shapes parts
processing, only need to change the output parameters. Laser, low
noise, small vibration, and no pollution while cutting.
1.6. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can
cut many kinds of materials, including metal, nonmetal, metal and
nonmetal based composite material, leather, wood, fiber, etc. But
for different material, it shows different laser cutting
adaptability due to its thermal physical properties and different
laser absorption rate.
>>> Fiber Laser Cutting Machine Performance of 1500W CNC
Tube/Metal Fiber Laser Cutting Machine
2.1. Excellent overall performance, changeable working tables, 7
seconds to finish high speed
changing, improve working efficiency of more than 48%.
2.2. The machine tool includes loading area and processing area,
standard configuration is
changeable working tables, auto change the workpiece between
processing area and loading
area by motor, convenient to upload and download. With the design
of changeable working table,
could prepare the next uploading while processing, highly improved
2.3. Equipped with exhaust device, have good exhausting effect and
2.4. Small occupied area, high system integration, convenient to
operate and maintenance, 24 hours continuous working.
2.5. The water chiller has good safety protection function, such as
over temperature, lack phase,
pressure, waterbreak, undervoltage, overload, etc. With stable
performance, satisfied the cooling
requirement of laser source.
Machine Aplication scope:
Stainless steel, carbon steel, alloy steel, silicon steel, spring
steel, aluminum, aluminum alloy, galvanized sheet and other metal
pipes and tubes.
Machine Applicable Industry
It is widely applied in industrial pipeline processing,
explosion-proof equipment, military industry, chemical industry,
oil exploration, lamps and lanterns, metal processing, ironware,
Machine main specifications:
|Laser source medium||Fiber laser|
|Cutting range(L*W)||3000mm × 1500mm||3000mm × 1500mm||3000mm × 1500mm|
|Z axle stroke||150 mm|
|Max cutting speed||40m/min||42m/min||45m/min|
|Max positioning speed||140m/min|
|Wok platform size/Max height of feeding material||4250x2500mm/more than 120mm|
|Cooling form||water cooling|
|Output power of laser source||1000W||1500W||2000W|
|Min. cutting gap||≤0.1mm||≤0.125mm||≤0.125mm|
|Positioning accuracy of X, Y and Z axles||±0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||±0.02 mm|
|Thickness of cutting material|
(according to material)
|Drive model||Imported servo motor|
|Continuous working time||24 Hours|
|Machine weight||About 5950Kgs|
|Outer dimension||9028mm x 3741mm x 1910mm ( L*W*H)|
|Total protection level of power supply||IP54|
Competitive Advantage of Suntop Laser :
1, Our 1500W sheet metal fiber laser cutting machine the main optic
parts are imported from Germany or USA
2, Our machine tools are processed by high temperature Aluminium
casting and welded which almost no deformation after 3-5 years.
3, We main for exporting, we have our professional after sales
4, We have our own core patent technology, so our machine with high
quality cost performance.
5, We do after sale service for oversea market within 12 hours.
6, We provide the free future programe and software upgrade.
7, We can customized the machine as per customer's requirements,
machine can achieve the automation.
The cutting samples photos as follows: