Products Name: Water (Liquid) Ring Vacuum Pump
Products Model: SK-12B
Displacement: 12 m3/min
Ultimate Pressure: 80 hPa 60 Torr
Motor Power: 18.5 kW
Rotating Speed: 980 rpm
Water Supply: 60 L/min
Inlet&Outlet Dimensions: 100 mm
Weight: 450 kg
Water (Liquid) Ring Vacuum Pump
1. Series SK，2SK Water Ring Vacuum Pumps can be used to exhaust
ordinary gases as well as condensable gases（such as water vapor).
Because they have the features of isothermal compression, they can
exhaust flammable and explosive gases. When the pump made up of
anti-corrosion material is selected, it can be used for exhausting
corrosive gases too.
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher
vacuum and better applicability. The different types of gases can
be pumped with the selected suitable working media. Therefore, they
can be applied in wider range.
3. The pumps run smoothly with low noise and consumption. The
energy-saving is 30 percent comparing with the Water Jet and the
Water VaporJet Pumps.
It can be applied to the vacuum drying, vacuum degassing, vacuum
concentration, vacuum evaporation, vacuum impregnation process in
chemical industry, food, medicine, textile, papermaking, electrical
industry and so on. It can compose a vacuum system together with
Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum,
high efficiency, low power consumption.
Regular Selection for Water（Liquid）Ring Vacuum Pump
1、Baced on the vacuum value
（1）If the pump is operated for long time with the inlet pressure
range between1.3×104～1×105Pa (between 100 and 760 Torr), please
choose series SK Water Ring Vacuum Pump.
（2）If the pump is operated for long time with the inlet pressure
range between5×103～1.3×104Pa（between40 and 100 Torr), please choose
series 2SK Water Ring Vacuum Pump.
（3）If the pump is operated for long time with the inlet pressure
range between1×103～1.3×104Pa（between8 and 100 Torr), please choose
series 2YK Liquid Ring Vacuum Pump.
There are four principles to choose working media（i.e.ring
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction
with the pumped gas;no corrosion to the pump; no pollution to the
If the water is selected as the working medium, the best
temperature of supply water should be lower than or equal to 15 °C;
the highest one should not be higher than 40°C. While the
transformer oil or other low viscosity and saturated vapor pressure
industrial oils are as the working media, the general supply
temperature should not higher than 40°C and the working media
temperature inside the pump chamber should not be higher than 60C,
when the liquid with lower boilling point is selected as the
working media under some special circumstances, the cooling unit
must be equipped to cool down the working media in order to ensure
that the max temperature is 30℃-50℃, lower than the boiling point.
For the closed circulated system of working media, the liquid
storage unit and cooler must be equipped, and the gas-liquid
separator must be installed at outlet. The mechanical seal should
be used for dynamic seal of the shaft.
3、Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the meachanical
seal when the pump is used in no leak occasion.
4、Choose the material of the part that the gas passed:
(1) For the non anti-corrosion pump, the shaft is made of 45#steel
or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed,
should be made of stainless steel 304 and 306, or other material
suitable for the respectively corrosive gas, or the parts should be
put with anti-corrosion coating.
5、 The motor should be selected based on pumping pressure.
If the pump is used for vacuuming while transferring gas, the
pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages
liquid ring compressor should be chosen and not the vacuum pump
refitted. Tthe power of the equipped motor should be increased
obviously. And the speclal gas-liquid separator and auto-drain unit
should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum
pump refitted as compressor. The power of the equipped motor should
be increased properly.
6、Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid
in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid
in the outlet must be circulated and cannot be discharged.