Sign In | Join Free | My ismap.com
ismap.com
Products
Search by Category
Wholesale Marketplace
Home > Plastic Flooring >

Vinyl Resin-Acid Resistance Tiles Flooring System

Country/Region china
Company Shanghai Sinopolymer Co., Ltd.
Categories Vinyl Resin
Telephone (86) 21-51592806
ICP License Issued by the Chinese Ministry
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Vinyl Resin-Acid Resistance Tiles Flooring System

    • Vinyl Resin-Acid Resistance Tiles Flooring System
    Product Description

    Vinyl Resin-Acid Resistance Tiles Flooring System

    Apply vinyl anticorrosive coatings and acid resistance tiles to the flooring system. Before the tiles laid, coating fiber glass 1-2 layers.
    The requirements to vinyl resin are the similar to FRP system.
    Executive standardGB50212-200 Specification for construction and acceptance of anticorrosive engineering of buildings

    Scope of application:

    Floor requires strict anti-corrosion in Chemical plants, electroplating factory, battery plant and that of acid-alkali neutralization pool in other factories.

    Construction process:

    1. Waterproof or damp proof treatment: the first floor on the ground shall be treated for waterproof or damp proof.

    Notethe substrate surface must be prepared to remove cement slurries, cement skin, loose or brittle particles, defects and parting compounds. Fresh concrete must be cur
    --ing more than 28 days. The residual moisture of the concrete surface must be less than 8%.

    2. Surface treatment: by abrasive blasting or grinding or other suitable mechanical methods to get a certain surface roughness and then vacuum cleaning.

    3. Primer coating: coating strong permeable primer to the treated substrate in order to ensure the surface adhesion.

    4. Lamination layerPlace the fiber glass smoothly, then apply the vinyl coatings which has been well mixed on the fiber glass for 1-2 layers, overlap joint of the fiber glass must be at least 50 mm, and the place of overlap joint on different layers must be staggered at least 50 mm. After each layer’s coating, compaction and de-foaming. After 24 hours curing, continue the next coating process. During the process, grinding to eliminate skin needles and then clean clearly.

    5. Intermediate coat: Apply the mixed vinyl intermediate coating 1-2 layers by trowel. After curing, grind to eliminate skin needles and then clean clearly.

    6. Tile laying: by the method of extruding the vinyl bedding mortar. Positioning before construction and pay attention to the slope design. Bedding mortar should be full filled, and acid-proof brick shall not slip. Ensure brick seam width meets requirements (typically 3±1mm) with special clamps.
    Before the tiles laying, take suitable measurement to ensure waxing only on the top surface of each tile.

    7. Grouting: After the bedding is cured, fill the tiles joint with proper mixed vinyl grouting material and smooth with small trowel.

    8. Curing and cleaning tile surfaceProvide wet paint” signs to protect newly coated finishes for 1-2days. Then clean tile surface with hot water.

    9. Joint repair: When found joint defects after cleaning and drying, mix the vinyl grouting mortar to repair the joint.

    【Back】 【Top】
    Quality Vinyl Resin-Acid Resistance Tiles Flooring System for sale
    Send your message to this supplier
     
    From:
    To: Shanghai Sinopolymer Co., Ltd.
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Find Similar Products By Category:
    Inquiry Cart 0