Choose Your Drawer Front Style
|Flat Panel and Raised Panel Front|
(1.75Sq Ft Minimum Charge)
|Inverse Cut Solid Wood Flat Panel|
(1.75Sq Ft Minimum Charge)
Great looking custom cabinet drawer fronts, finished with state of
the art equipment, at prices that will make you smile!Turnaround
time on finished doors/drawer fronts is 10-12 work days and may
vary by workload.
Start by viewing and selecting your options below and choosing your
finish then just use the menus above to select those options and click on
the "add to cart" button to see the final price of your drawer
fronts.With prices this good, you'll see why we can't show these
outside the cart! Pricing in the menus above represent PER SQUARE FOOT option prices. Your shopping cart will reflect the actual per door
price. Five piece drawer fronts have a minimum charge size of 1.75 square
* As you progress through the pulldown menus above, just add up all
of your selected options. This is your price per square
foot.Multiply your price per square foot by the square footage of
your door and you have your drawer front price. (Height x Width)/144=Square Feet There may be a slight variance based on calculation methods.
Here are some suggestions for mounting your drawer fronts to your
- Pre-drill two to four holes through the front end ofthe drawer box
(two for smaller drawer fronts and four for larger drawerfronts).
The pre-drilled holes should be the same or slightly largerdiameter
as the wood screw you will use to attach the front.
- Install the drawer box in its location.
- Use some foam type double stick tape and place the tape on the
front of the drawer box. Use one or two strips, enough to hold the
drawer front in place.
- Press the drawer front onto the drawer box.
- Align the drawer front vertically and horizontally with the
surrounding drawer fronts and doors.
- Once you have adjusted the alignment of the drawer front, clamp or
hold the front in place.
- Insert screws from inside the drawer box into the drawer front,
being careful not to over tighten.
- At this point, if there is a gap between the drawer and the front,
caused by the foam tape, you can take out the screws, remove the
tape and re-attach the drawer front to the drawer box.
Drawer boxes with 1/2" thick sides can use a 1" wood screw to
attach the front to the drawer box. Drawer boxes with 5/8" or 3/4"
thick sides will require a wood screw of 1-1/4".
(Be sure to check the combined thickness of your drawer box and
drawer front to insure that the screw you use will not penetrate
through the face of the drawer front. Be sure that your screw
length is 1/8" to 1/4" less than this combined thickness.)
Don't forget, we are standing by to help you!
Just call us Monday - Friday 8:00am to 5:00pm (Central)
Choose Your Wood Species
- Alder, Clear
- Alder, Rustic
- Birch (Premium)
- Birch (Standard)
- Birch (Paint Grade)
- Cherry (Premium)
- Cherry (Standard)
- Cherry (Rustic)
- Hickory (Standard)
- Hickory (Rustic)
- Maple, Hard (Standard)
- Maple, Hard (Premium)
- Pine (Clear, Standard)
- Pine (Rustic, Knotty)
- Red Oak (Standard)
- Red Oak (Premium)
- Red Oak (Factory)
- Red Oak (Rustic)
- White Oak (Standard)
|*Specie availability may be affected by market conditions.Read
about Grade characteristicshere|
Choose Your Finish Colors
*(Not all finishes available on all wood species due to
Choose Your Framing Edge
Edge profiles denoted with an asterisk (*) are NOT recommended for use with Euro, demountable or Inserta style
Edges displayed above are computer generated to represent the
actual product as closely as possible but may not be exact.If you are seeking an exact match, contact us for a sample.
Choose Your Framing Bead
Choose Your Panel Style
Solid wood panels may be comprised of multiple pieces of wood
joined together to achieve the necessary width. Inverted panel
IP115 is charged as raised pa